Products
Desktop Thickness Gauge
PW-2 Non-contact Desktop Thickness Gauge
It is also possible to measure the boundary between the coated part and the foil part of the electrode material, which could not be measured with the contact method.
Measures thickness of set sheet with optical sensors installed above and belowSince a servo motor is used for movement, measurements can be made at accurate positions |
 |
Possible to accurately measure thickness of sampled sheets such as LIB offline at electrode manufacturing sites
Since the minimum measurement pitch is 0.1 mm, it is possible to accurately measure the gap between the foil and the coating of the intermittent coating.
4 measurement pitches (0.1/0.2/0.5/1.0 mm)
Since it is non-contact, measurements can be made without crushing the sample
Repeat accuracy is R 0.5 μm
Distribution display using histogram
Measured results are saved in CSV format
Measurement variation problem due to individual differences is resolved
Supports 6 languages
Specifications
■Demonstration machine Laptop computer and controller board are placed separately
| Measurement accuracy Minimum resolution | 0.25 μm (Measured at a measurement pitch of 1.0 mm in a constant temperature environment) |
| Measurable maximum sheet thickness | 500 μm |
| Measurable minimum pitch | 0.1 mm |
| Maximum measurement speed | 100 mm/sec (When measurement pitch is 1.0 mm) |
| Measurable sheet length and width | approx. 500 mm, approx. 50 mm |
*Please use in a constant temperature environment as measurement variations may occur due to temperature changes.
Apparatus configuration
| ● Measurement apparatus main body…External dimensions: Depth 535 mm x Width 320 mm x Height 253 mm, Weight: 30 kg |
| ● Control board…External dimensions: Depth 400 mm x Width 500 mm x Height 640 mm, Weight: 20 kg |
| ● Laptop computer…<Accessories> ・Material cutting mat ・Material cutting mold 50 x 650 mm ・Material pasting jig |
